Sanyo MDF-U730

OPTIONAL COMPONENT
Automatic temperature recorder
To record the chamber temperature, an optional automatic temperature recorder is available. Please
consult with our sales department or agency for recorder installation.
For the proper usage of temperature recorder, refer to an instruction manual included with the recorder.
The available recorder and its attachment location are as follows:
Recorder type Attachment location (See figure below)
MTR-4014LH Top right of the frame
MTR-G85 Top right of the frame,
Recorder MTR-4014 LH or MTR-G85
(Figure shows MTR-G85)
sn El O
1
1
de Capillary tube
7 LAT
dee
ト |
= N Recorder senser
[oo]
O
AX WARNING
Always disconnect the power supply to the unit before starting the installation of recorder to prevent
electric shock or injury.
«27 =