Sanyo MDF-U730 - Specifications; General Specification

Specification
MDF-U730
Items Specification
Model description Biomedical freezer
Model Number MDF-U730
Outer dimension (Max) W 770 x D 830 x H 1955 mm
Inner dimension
W 650 x D 710 x H 1370 mm
Effective chamber capacity
632 liters. 22.4cu.ft
Cooling performance
-30°C at 1/2 height of the chamber ( AT : 35°C, No load )
Exterior cabinet
Zinc galvanized steel w/powder polyester coating (new bio-gray)
Interior cabinet
Pre-coated steel (white)
Insulation Rigid polyurethane foam Foam: R-141b
Door Zinc galvanized steel w/powder polyester coating (new bio-gray)
Door lock 1 pcs
Compressor Hermetic rotary type ( 300W )
Refrigerant R-404A (HFC refrigerant)
Refrigerator oil E-68NT1 — ME te MA VATANE .
Condenser Skin type a ' ー
Shelf Hard steel wire PE coating. Max load : 50kg/shelf
Accessories 4 pcs (W626mmxD620mm)
Others Key 1 set ,2 large & 2 small nylon clips
Caster 4рсз. (Front & rear movement wheels)
Leveling legs
2 pes in front side.
Access hole
Inner diameter 30mm. 1 places in left side of frame and 1
places on top of the unit.
Option
„Automatic recorder: MTR-G85G, fixture MPR-S7
Automatic recorder: MTR-4014LH, fixture MPR-S30
Power supply
Single phase, local voltage
Weights
150 kg