Sanyo MDF-U730

REFRIGERATOR COMPONENTS
Control panel
9 8 dí
|
|
. | |
| |
| |
O O
DOOR ALARM
TEMPERATURE(‘C)
| | | | |
| | | | | |
1 2 3 4 5 6
1. Alarm test key (ALARM TEST): Buzzer will sound and remote alarm will be activated by pressing
this key.
2. Alarm buzzer stop key (BUZZER): Press this key to silence the buzzer in the event that the alarm
operates and buzzer sounds. See page 15 for the details.
3. Defrost key (DEF): Defrost will be started by pressing this key for more than Sseconds.
4. Set key (SET): Pressing this key activates temperature set mode and the digit which can be set is
flashed. By pressing the key again after setting, the set value is accepted.
5. Digit shift key (pp): Pressing this key in set mode causes the changeable digits to move. Key lock
is activated by pressing this key for more than 5 seconds in the temperature display mode. See “Key
lock operation” on page 14.
6. Numerical value shift key (4): Pressing this key in the setting mode causes the numerical value
to change. “ON-OFF” of key lock can be selected by pressing this key in the key lock mode.
7. Temperature display: This indicator shows the chamber temperature, set temperature, or error
code.
8. Alarm lamp (ALARM): This lamp is flashed during alarm condition.
9. Door check lamp (DOOR): This lamp is lit when the door is open.
-21-