Sanyo MDF-U730 - Parts Specification

Parts specification
| 115V6ohz
| | |
Compressor : Hermetic rotary type
Main winding : Between C-R S
Aux . winding : Between C-S C
(at 25°C) R
Type 80778022
Output 400W
Resistance (main winding)| 1.820
Resistance (Aux. winding) 5.430
Over load relay
Type P22MUF
Operating 130+10°C
temperature 69+10°C
Closing temperature 5 ~ 15sec
Short time trip
Starting capacitor : To make compressor start easily
Rating 100uF
160VAC
Running capacitor
Rating 20uF
220VAC
Starting relay : To supp ly both winding with the power to start up compressor
Type
AMVL-180A
Operating
voltage
108
~111V
Recovering
voltage
30
~
75V
Cooling fan motor : To circulate internal air
Type FL2-
C011BMPK
Rating 110V,1.5W
Defrost heater : To defrost on cooling unit during defrosting
Resistance 12.40x2
Output 165Wx2
Drain pan heater : To heat the drain pan during defrosting
Resistance 1770
Output 75W