Sanyo PDG-DHT100L - Main and Control Boards Removal

-23-
Mechanical Disassembly
3 Main and Control boards removal
1 Remove 6 screws-A (M3x6) on the Main board and 2 screws-B (M3x6) on the AV
panel and then remove the Main board.
2 Remove 2 screws-C (T4x10) and pull up the Control board assy.
Main board
A
A
A
A
A
A
B
B
C
C
Control board
assy
Control board
(T3x6)x2
(M3x6)
(M3x6)x2
Control button
(M3x6)