Sanyo PDG-DXL100 - Setting

English
27
English
User Controls
Input Search
When this function is turned “On”, the projector will search for
other signals if the current input signal is lost. When this function is
turned “Off”, it will only search a specied connection port.
Fan Control
Choose “On” to turn on Fan Control mode. Operate the fan at full
speed continuously to allow for proper high altitude cooling of the
projector.
Lamp Life Reminder
Choose this function to show or to hide the lamp end of life warning
message.
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption and extend the lamp life. Choose “Off” to return to
normal mode.
BrilliantColor
TM
Choose “On” to provide true, more vibrant colors.
RS232 Mode

RS232: Allow RS232 control of an individual projector.

Network: Allow network LAN via web browser (Internet Ex-
plorer) to control of projector.
Setting