Sanyo PDG-DXL100 - Specifications

English
49
English
Appendices
Specications
Projection System Single Chip DLP
®
Technology by Texas Instruments
Number of Pixels XGA: 1024 pixels(H) X 768 lines(V), up to UXGA (1600 X 1200) with scaling
technology
Lamp 225W (170W on ECO mode)
Projection Lens F#2.6 f=6.97mm with manual focus
Projection Screen Size
(Diag.)
40 to 307 inches (1.02 to 7.80 meters) Diagonal
Projection Distance 1.62 to 12.46 feet (0.5 to 3.8 meters)
Video Compatibility - NTSC-M/NTSC-4.43/PAL-B, D, G, H, I/PAL-M/PAL-N/SECAM
- Component: SDTV(480i/576i), EDTV(480p, 576p), HDTV(720p, 1080i/p)
H. Frequency 31.35kHz~79.98kHz horizontal scan
V. Frequency 50Hz~75Hz vertical refresh
Power Supply Universal AC input 100-240V ; Input Frequency 50-60Hz
Power Consumption Normal mode:320W
Standby mode <1 Watt
Input Current 2.5-1.0A (100-240V AC)
I/O Connectors - Power: AC power input socket
- Computer Input: 2x 15-pin D-Sub VGA for analog/component and HDTV
signal
- RS232 Input: 1x Mini DIN 8-Pin for RS232 control input
- HDMI Input: 1x 19-Pin HDMI(V1.3) for digital video input
- RJ-45 Input: 1x RJ-45 for network management
- Video Input:
1x Composite video RCA input
1x S-Video input
- Audio Input: 1x Stereo Mini Jack
- Computer Output: 1x 15-pin D-Sub VGA for monitor
- Audio Output: 1x Stereo Mini Jack
Built-in Speaker 8W (monaural)
Weight 8.2lbs / 3.7kgs
Dimensions (W x D x H) 12.1 x 11.5 x 4.7 inches (306.5x 292.2 x 120.5 mm) (Including protrusions)
12.1 x 9.9 x 4.1 inches (306.5x 252.3 x 105.0 mm) (not including protrusions)
Environmental - Operating Temperature: 41~95
o
F (5~ 35
o
C)
Humidity: 80% maximum (Non-condensing)
- Storage Temperature: -4~140
o
F (-20~60
o
C)
Humidity: 80% maximum (Non-condensing)
Safety Regulation Safety Regulation: UL/CUL
EMC: CB Report, CE Class B, FCC Class B, C-Tick, KC, CCC
Optional Parts - COMPONENT-VGA Cable : POA-CA-COMPVGA
- Serial control cable : POA-MCSRL
- VGA cable (10m) : KA-MC-DB10
- SCART-VGA Cable : POA-CA-SCART