Sanyo PDG-DXL100 - Functional Execution Command

English
57
English
Appendices
Command Function Command Function
C00 POWER ON C24 YPbPr 2
C01
POWER OFF
(Immediate POWER OFF)
C25 ---
C26 Scart
C04 HDMI C27 IMAGE(Toggle)
C05 Computer 1 C30 D.zoom +
C06 Computer 2 C31 D.zoom -
C09 Volume + C33 Video
C0A Volume - C34 S-Video
C0B SOUND MUTE ON C35 YPbPr 1
C0C SOUND MUTE OFF C3A POINTER RIGHT
C0D VIDEO MUTE ON C3B POINTER LEFT
C0E VIDEO MUTE OFF C3C POINITER UP
C0F Aspect 4:3 C3D POINITER DOWN
C10 Aspect 16:9 C3F ENTER
C11 Image mode Presentation C43 FREEZE ON
C12 Image mode Movie C44 FREEZE OFF
C13 Image mode sRGB C89 AUTO ADJ.
C14 Image mode Bright C8E KEYSTONE +
C15 Image mode User C8F KEYSTONE -
C1C MENU ON
C1D MENU OFF
Functional Execution Command
Format
The command is sent from PC to the projector with the format below;
‘C’ [Command] ‘CR’
Command: two characters (refer to the command table below.
■ The projector decodes the command and returns the ‘ACK’ with
the format below;
‘ACK’ ‘CR’
■ When the projector cannot decode the command, it returns with
format below.
‘?’ ‘CR’ projector and serial port on the PC.