Sanyo PLC-WM5500 - Resetting Filter and Scroll Counters

-10-
Resetting the Scroll Counter
Scroll counter
Resetting the Filter Counter
Filter counter
Be sure to reset the Filter counter after replacing the filter car-
tridge.
Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select Setting and then
press the Point 8 or the SELECT button
Use the Point ed buttons to select Filter counter and
then press the SELECT button. Use the Point ed but-
tons to select Filter counter Reset and press the SE-
LECT button. Filter counter Reset? appears. Select
[Yes] to continue.
1
2
Another confirmation dialog box appears, select [Yes] to
reset the Filter counter.
3
Be sure to reset the Scroll counter after replacing the filter
cartridge.
Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select Setting and then
press the Point 8 or the SELECT button
Use the Point ed buttons to select Filter counter and
then press the SELECT button. Use the Point ed but-
tons to select Scroll counter Reset and press the SE-
LECT button. Scroll counter Reset? appears. Select
[Yes] to continue.
1
2
Another confirmation dialog box appears, select [Yes] to
reset the Scroll counter.
3
Maintenance
Filter counter
Reset? appears.
Select Yes, then
another confirmation
box appears.
Select Yes again to
reset the Filter coun-
ter.
H
Filter counter 150 H
Timer 400 H
Filter counter reset
Scrolls remaining 9 Scroll(s)
Scroll counter Reset
Scroll counter
Reset? appears.
Select Yes, then
another confirmation
box appears.
Select Yes again
to reset the Scroll
counter.
Scroll counter Reset?
Filter counter 150 H
Timer 400 H
Filter counter reset
Scrolls remaining 9 Scroll(s)
Scroll counter Reset