Sanyo PLC-WM5500 - Fan and Main Board Removal; A;V Board Removal

-20-
Mechanical Disassembly
2. Fan (FN905) and Main board removal
1. Remove 1 screw-A (M3x8) and 3 screws-B (T3x8) to take the Fan (FN905)
upward off.
2. Remove 12 sccrews-C(M3x8) to take the Main board shield top off.
3. Remove 2 screws-D(M3x8), 6 hex-screws-E and 2 screws-F(M3x8) and
then remove the main board.
3. A/V board and removal
1. Remove 1 screw-A (M4x8) and pull the A/V board assy upward.
2. Remove 2 screws-B (T3x8) to take the Main board shield bottom.
D
D
C
C
C
C
C
C
C
C
Main board
Main board
shield top
B
B
A
Fan (FN905)
Main board shield bottom
A/V board
AV panel
C
C
A
B
B
B
F
C
C
F
E