Sanyo PLC-WXU30 Service Manual

-21-
Optical Parts Disassembly
527
528
5
9
Fig.8
1
6
10
When mounting or assembling the optical parts in the opti-
cal unit, the parts must be mounted in the specified loca-
tion and direction as shown in figure below.
2
3
4
8
8
11
, Locations and Directions
Rugged surface
is facing this
side.
Point marker is
printed on this side
up
Point marker is
printed on this side
up
No. Parts Name
1 Integrator lens (OUT)
2 Prism beam splitter (PBS)
3 Condenser lens (OUT)
4 Dichroic mirror (B)
5 Dichroic mirror (G)
6 Condenser lens (G)
7 Relay Lens (IN)
8 Mirror (R)
9 Condenser lens (R)
10 Condenser lens (B)
11 Mirror (B)
7
Film attached
side is facing this
side.

Sanyo PLC-WXU30 Specifications

General

Resolution	WXGA (1280x800)
Brightness	3000 ANSI Lumens
Lamp Life (Normal Mode)	2000 hours
Display Type	LCD
Projection Technology	3LCD
Throw Ratio	1.5 - 1.8:1
Screen Size	30 - 300 inches
Input Ports	HDMI, VGA, Composite, S-Video