Sanyo PLC-XF1000 User Manual

28
Basic Operation
Information
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Press the INFORMATION button to display the
information window on the screen. To hide the
information window, press the INFORMATION button
again or Point 7 8 buttons.
The information window can also be selected from the
menu.
Information Menu
Information Menu
* The H- and V-sync freq. values described in this figure
may be different from the actual values.

Sanyo PLC-XF1000 Specifications

General

Vertical scan range	48 - 120 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	4000:1
Projector native resolution	XGA (1024x768)
Resolution	2359296 pixels
Aspect ratio	4:3
RS-232 ports	1
Dimensions (WxDxH)	530 x 269 x 756 mm
Lamp power	330 W
Light source type	Lamp
Service life of light source (economic mode)	3000 h
Serial interface type	RS-232
Power consumption (economy mode)	770 W

Weight and Dimensions

Weight	27578 g