EasyManuals Logo

Sanyo PLC-XF1000 User Manual

Sanyo PLC-XF1000
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
Moving the Projector
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
Do not drop or bump the projector, otherwise
damages or malfunctions may result.
When carrying the projector, use a suitable carrying
case.
Do not transport the projector by courier or any
other transport service in an unsuitable transport
case. This may cause damage to the projector. For
information about transporting the projector by
courier or any other transport service, consult your
dealer.
Do not put the projector in a case before it is
cooled enough.
Do not transport the projector with a replacement
lens installed.
Safety Instructions
Retract the adjustable feet to prevent damage
to lens and cabinet. For safety, holding the
projector on both sides by 2 or more people is
recommended to move the projector because
the projector is heavy. When moving the
projector by one person from necessity, hold
the handle carefully. Do not hold the lens
mount cover. Moving it improperly may result
in damage of cabinet or person's injury.

Table of Contents

Other manuals for Sanyo PLC-XF1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-XF1000 and is the answer not in the manual?

Sanyo PLC-XF1000 Specifications

General IconGeneral
Vertical scan range48 - 120 Hz
Horizontal scan range15 - 120 kHz
Projection technologyLCD
Contrast ratio (typical)4000:1
Projector native resolutionXGA (1024x768)
Resolution2359296 pixels
Aspect ratio4:3
RS-232 ports1
Dimensions (WxDxH)530 x 269 x 756 mm
Lamp power330 W
Light source typeLamp
Service life of light source (economic mode)3000 h
Serial interface typeRS-232
Power consumption (economy mode)770 W
Weight and Dimensions IconWeight and Dimensions
Weight27578 g

Related product manuals