Sanyo PLC-XF46N - Page 92

-92-
Electrical Adjustments
-4B_PANEL Ghost Timer Read only 0 ~ 32767 – –
-5B_PANEL Ghost Timer Reset Reset to set data to "10" (✽) B_panel ghost timer reset 0 ~ 10 0 –
S 973 - Panel Vertical Thread Canceller
-0VS_R_RGT 0 ~ 1 1 –
-1VS_G_RGT 0 ~ 1 1 –
-2VS_B_RGT 0 ~ 1 1 –
-3VS_DAT1 ~ 9 0 ~ 255 0 –
-4VS_GDAT1 0 ~ 255 64 –
-5VS_GDAT2 0 ~ 255 64 –
-6VS_GDAT3 0 ~ 255 64 –
-7VS_POS 0 ~ 15 0 –
S 974 - Panel Vertical Thread Canceller (LEFT/RIGHT REVERSE)
-0VS_R_RGT 0 ~ 1 1 –
-1VS_G_RGT 0 ~ 1 1 –
-2VS_B_RGT 0 ~ 1 1 –
-3VS_DAT1 ~ 9 0 ~ 255 0 –
-4VS_GDAT1 0 ~ 255 64 –
-5VS_GDAT2 0 ~ 255 64 –
-6VS_GDAT3 0 ~ 255 64 –
-7VS_POS 0 ~ 15 0 –
S 980 - Color Shading Stair Level 4 Lamp Mode, 2 Lamp Mode 1/4 - 2/3
-0R_Stair MIN Level 0 ~ 1023 284 –
-1R_Stair MID2 Level 0 ~ 1023 432 –
-2R_Stair MID1 Level 0 ~ 1023 522 –
-3R_Stair MAX Level 0 ~ 1023 608 –
-4G_Stair MIN Level 0 ~ 1023 284 –
-5G_Stair MID2 Level 0 ~ 1023 432 –
-6G_Stair MID1 Level 0 ~ 1023 522 –
-7G_Stair MAX Level 0 ~ 1023 608 –
-8B_Stair MIN Level 0 ~ 1023 284 –
-9B_Stair MID2 Level 0 ~ 1023 432 –
-10B_Stair MID1 Level 0 ~ 1023 522 –
-11B_Stair MAX Level 0 ~ 1023 608 –
S 981 - Color Shading Stair Level Type-L / Type-R OFFSET
-0R_Stair MIN Level 0 ~ 255 0/0 –
-1R_Stair MID2 Level 0 ~ 255 0/0 –
-2R_Stair MID1 Level 0 ~ 255 0/0 –
-3R_Stair MAX Level 0 ~ 255 0/0 –
-4G_Stair MIN Level 0 ~ 255 0/0 –
-5G_Stair MID2 Level 0 ~ 255 0/0 –
-6G_Stair MID1 Level 0 ~ 255 0/0 –
-7G_Stair MAX Level 0 ~ 255 0/0 –
-8B_Stair MIN Level 0 ~ 255 120/140 –
-9B_Stair MID2 Level 0 ~ 255 126/131 –
-10B_Stair MID1 Level 0 ~ 255 127/130 –
-11B_Stair MAX Level 0 ~ 255 0/0 –
S 997 - Panel Life Test Pattern Display (UP/DOWN KEY is available at data 0)
-0Panel Life Test Pattern Display Data 0 : Menu 0 ~ 1 0 –
S 998 – Stack Pattern Display (UP/DOWN KEY is available at data 0)
–0Stack Pattern Display Data 0 : Menu (Volume ± KEY : W, R, G, B, Y, LB) 0 ~ 1 0 –
S 1000 – CXA2019AQ
–0H_LOCK Status Register (0: Not locked, 1: Locked) 0 / 1 0
–1KILLER Status Register (0: OFF, 1: ON) 0 / 1 1
–2NT_PAL Status Register (0: NTSC, 1: PAL) 0 / 1 0
–3F50_60 Status Register (0: 60Hz, 1: 50Hz) 0 / 1 0
–4SECAM Status Register (0: Not SECAM, 1: SECAM) 0 / 1 0
–5VCO_F Status Register (0: 3.58MHz, 1: 4.43MHz) 0 / 1 1
–6R11_Y_DELAY_CV_PAL Y Delay at composite signal 0 ~ 3 3
–7R11_Y_DELAY_CV_SECAM Y Delay at composite signal 0 ~ 3 0
–8R11_Y_DELAY_CV_NTSC Y Delay at composite signal 0 ~ 3 3
–9R11_Y_DELAY_CV_NTSC443 Y Delay at composite signal 0 ~ 3 0
–10R11_Y_DELAY_CV_PAL_M Y Delay at composite signal 0 ~ 3 2
–11R11_Y_DELAY_CV_PAL_N Y Delay at composite signal 0 ~ 3 2
–12R11_Y_DELAY_CV_MONO_60 Y Delay at composite signal 0 ~ 3 3
–13R11_Y_DELAY_CV_MONO_50 Y Delay at composite signal 0 ~ 3 3
–14R11_Y_DELAY_YC_PAL Y Delay at Y/C Sep. signal 0 ~ 3 0
–15R11_Y_DELAY_YC_SECAM Y Delay at Y/C Sep. signal 0 ~ 3 3
–16R11_Y_DELAY_YC_NTSC Y Delay at Y/C Sep. signal 0 ~ 3 0
–17R11_Y_DELAY_YC_NTSC443 Y Delay at Y/C Sep. signal 0 ~ 3 0
–18R11_Y_DELAY_YC_PAL_M Y Delay at Y/C Sep. signal 0 ~ 3 0
–19R11_Y_DELAY_YC_PAL_N Y Delay at Y/C Sep. signal 0 ~ 3 0
–20R11_Y_DELAY_YC_MONO_60 Y Delay at Y/C Sep. signal 0 ~ 3 0
Group
No.
Data
Range
Initial Value
Function
Item
No.
Item