Sanyo PLC-XK2600 User Manual

14
Connecting to a Computer
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting
cables.
31RWH
• When the MIC function is set to 2IIin the Sound menu, the MIC function is disabled.
•When 0,& is set to On in Sound Menu, AUDIO IN (PC/MIC) and AUDIO IN(L/R) terminals can be
connected at the same time. At this time, AUDIO IN (PC/MIC) termianl as MIC input, AUDIO IN(L/R)
terminal is as COMPUTER or VIDEO audio input.
• Input sound to the AUDIO IN terminal when using the COMPUTER IN 1/ S-VIDEO IN / COMPONENT
IN and the COMPUTER IN 2/MONITOR OUT terminals as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN/
COMPONENT IN and not the COMPUTER IN 2/MONITOR OUT.
&DEOHVXVHGIRUFRQQHFWLRQ
• VGA Cables (Mini D-sub 15 pin) *(Only one cable is supplied.)
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
(MIC)-
External Audio Equipment
Audio
cable
(stereo)
Audio cable
(stereo)
Audio Output
AUDIO IN (PC or MIC)
AUDIO OUT
(stereo)
Audio Input
Monitor Input
or
Monitor Output
COMPUTER
IN 2 /
MONITOR OUT
VGA
cable
COMPUTER IN 1
/ S-VIDEO IN
/COMPONENT IN
VGA
cable
Monitor
Output
This terminal is
switchable. Set up
the terminal as either
Computer input or
Monitor output. (See
Page 49.)
When using AUDIO
IN(PC/MIC) terminal
as MIC input,
connect to this
terminals for PC
audio input.
PC AUDIO
IN
Audio Output
,QVWDOODWLRQ

Sanyo PLC-XK2600 Specifications

General

Brand	Sanyo
Model	PLC-XK2600
Category	Projector
Language	English