&RPSXWHU,QSXW
,PDJH$GMXVW0HQX
,PDJH$GMXVWPHQW
5HVHW
Press the MENU button to display the On-Screen
0HQX8VHWKH3RLQWŸźEXWWRQVWRVHOHFW,PDJH
adjust and then press the Point Źor the SELECT
button.
1
2
8VHWKH3RLQWŸźEXWWRQVVHOHFWWKHGHVLUHGLWHP
and then press the SELECT button to display the
adjustment dialog box. Use the Point ŻŹ buttons
to adjust the setting value.
3
1RWH
• When White balance5HG, *UHHQ or Blue is
adjusted, Color temp. will change to 8VHU.
• When %ODFNERDUG*UHHQ or &RORUERDUG
is selected in Image select, Color temp. will
change to %ODFNERDUG or &RORUERDUG.
Press the Point Ż button to decrease the contrast;
press the Point Źbutton to increase the contrast (from
0 to 63).
Press the Point Ż button to decrease the brightness;
press the Point Źbutton to increase the brightness
(from 0 to 63).
Contrast
%ULJKWQHVV
Press the Point Ż button to lighten R/G/B tone; press
the Point Ź button to deepen R/G/B tone (from 0 to 63).
:KLWHEDODQFH5HG*UHHQ%OXH
Use the Point ŻŹ buttons to select the desired Color
temp. level (XLow, Low, Mid,or+LJK).
Color temp.
Use the Point ŻŹ buttons to adjust the gamma value
to obtain a better balance of contrast (from 0 to 15).
*DPPD
Press the Point Ż button to decrease the sharpness
of the image; press the Point Ź button to increase the
sharpness of the image (from 0 to 15).
6KDUSQHVV
To reset the adjusted data, select 5HVHWand press the
SELECT button. A confirmation box appears and then
select <HV. All adjustments will return to their previous
figures.
Use the Point ŻŹ
buttons to adjust the
setting value.
Selected Image mode
Store
To store the adjusted data, select Store and press the
3RLQWŹRUWKH6(/(&7EXWWRQ8VHWKH3RLQWŸź
buttons to select one from Image 1 to 4 and press the
SELECT button.
A confirmation box appears and then select <HV. Stored
data can be called up by selecting an ,PDJH in the
Image Mode Selection on page 32.
A confirmation box appears
and then select <HV.
Store
3UHVVWKH3RLQWŻŹEXWWRQVWRVHOHFW2IIor On.
2II ...... Disabled.
On ...... The iris function is activated.
,ULV