Sanyo PLC-XK2600 - Page 40

40
,PDJH$GMXVWPHQW
1
2
Press the Point Ż button to decrease the contrast; press
the Point Ź button to increase the contrast (from 0 to 63).
Press the Point Ż button to decrease the brightness;
press the Point Ź button to increase the brightness
(from 0 to 63).
Contrast
%ULJKWQHVV
Press the Point Ż button to lighten R/G/B tone; press the
Point Ź button to deepen R/G/B tone (from 0 to 63).
:KLWHEDODQFH5HG*UHHQ%OXH
Use the Point ŻŹ buttons to select the desired Color
temp. level (XLow, Low, Mid or +LJK).
Color temp.
Press the Point Ż button decrease the intensity of the
color; press the Point Źbutton increase the intensity of
the color (from 0 to 63).
Press the Point ŻŹbuttons to adjust the tint value to get
a proper color balance (from 0 to 63).
Color
7LQW
31RWH
• When the :KLWHEDODQFH5HG, *UHHQ or Blue is adjusted, the Color temp. level will change to 8VHU.
• Tint cannot be selected when the video system is 3$/, 6(&$0, 3$/0 or 3$/1 (p. 38).
• When %ODFNERDUG*UHHQ or&RORUERDUGis selected in Image select, Color temp. will change to
%ODFNERDUG or &RORUERDUG.
,PDJH$GMXVW0HQX
Press the MENU button to display the On-Screen
0HQX8VHWKH3RLQWŸźEXWWRQVWRVHOHFW,PDJH
adjust and then press the Point Źor the SELECT
button.
8VHWKH3RLQWŸźEXWWRQVVHOHFWWKHGHVLUHGLWHP
and then press the SELECT button to display the
adjustment dialog box. Use the Point ŻŹ buttons to
adjust the setting value.
Selected Image mode
Use the Point ŻŹ buttons to
adjust the setting value.
9LGHR,QSXW
Press the Point Ż button to decrease the sharpness
of the image; press the Point Ź button to increase the
sharpness of the image (from 0 to 15).
6KDUSQHVV
Use the Point ŻŹ buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
*DPPD
3UHVVWKH3RLQWŻŹEXWWRQVWRVHOHFW2IIor On.
2II ...... Disabled.
On ...... The iris function is activated.
,ULV