Sanyo PLC-XM150 - Connecting to a Computer (Digital and Analog RGB)

-19-
Mechanical Disassembly
Mechanical disassembly
1. Lamp cover and Prism cover removal
1. Loosen 1 screw-A and remove the Lamp cover upward off.
2. Loosen 1 screw-B and remove the Prism cover by sliding it in the arrow
direction.
Filter cartridge
T3x8
T3x8
Cabinet top assy
RC front
window
LED decoration
F/T RC+LED
board
Prism cover
1-1. Cabinet Top removal
1. Open the filter cover and remove the filter cartridge.
2. Remove 12 screws-A (M3x8) and then take the Cabinet Top Assy upward
off.
A
B
Lamp cover
A
A
A
A
A
A
A
A
A
A
A
A
T3x8