31
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button.
“No show” disappears after 4 seconds.
NO SHOW button
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
P-Timer display
✔Note:
• See the previous page for the
description of other buttons.
Remote Control
NO SHOW
button
P-TIMER
button
Press the KEYSTONE button on the remote control. The
“Keystone” appears on the screen.
Use the Point ed buttons to correct keystone distortion.
The keystone adjustment can be stored (see page 45).
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Reduce the upper width
with the Point
e button.
Reduce the lower width
with the Point
d button.
KEYSTONE button
KEYSTONE
button
Basic Operation
To Next Page
Loading...
Need help?
General
