Sanyo PLC-XT35L User Manual

13
q
w
e
t
u
i
o
wLAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.59, 69).
qWARNING TEMP. indicator
Blinks red when the internal temperature of the
projector exceeds the operating range (pp.61, 68).
eON/STAND-BY button
Turn the projector on or off (pp.24–25).
rINPUT button
Select an input source (pp.34–35).
!1INFO. button
Display the input source information (p.28).
yPOINT ed7 8 (VOLUME +/–) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.26).
– Pan the image in Digital zoom + mode (p.47).
– Adjust the volume level (Point 7 8 buttons)
(p.29).
uSELECT button
– Execute the selected item (p.26).
– Expand or compress the image in the Digital zoom
mode (p.47).
Top Control
r
y
!0
!1
!2
tLENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.30).
iWARNING FILTER indicator
– Blinks orange indicating the filter needs cleaning.
– Lights orange when clogging of the filter is
detected, urging immediate cleaning.
oLAMP indicator
Lights red during operations.
!0POWER indicator
– Lights when in stand-by mode and during
operations.
– Blinks during the cooling-off period.
– Blinks in the Power management mode (p.53).
!2MENU button
Open or close the On-Screen Menu (p.26).
✔Note:
• All five indicators on the top control blinks when the
projector detects an abnormal condition.
Part Names and Functions

Sanyo PLC-XT35L Specifications

General

Brand	Sanyo
Model	PLC-XT35L
Category	Projector
Language	English