Sanyo PLV-Z1 - Integrator and Relay Lens Adjustment

-20-
■ Optical Adjustment
1. Turn the projector on by a state of without FPC
cables.
2. Project all of lights on the screen.
3. Adjust the adjustment base of integrator lens ass’y
to make color uniformity in white.
2. INTEGRATOR ADJUSTMENT
Fig. 3
1. Turn the projector on by a state of without FPC
cables.
2. Project all of lights on the screen.
3. Adjust the adjustment base of relay lens ass’y to
make color uniformity in white.
3. RELAY ADJUSTMENT
Fig. 4