Sanyo PLV-Z4 - Page 17

- 17 -
4-2
Cabinet front ass'y disassemblies-1.
1. Remove the screw-A(M3x6).
2. Remove the screws-C(T3x8) and remove the Mounting shutter.
3. Remove the 3 screws-B(T3x8) and remove the Cover lens bottom.
A
B
B
B
C
Fig. 4-2
Cover lens bottom
Mounting shutter
Mechanical disassemblies
A
B
4-3
Cabinet front ass'y disassemblies-2.
1. Remove the tape, unhook the stoppers and remove the R/C board.
1. Remove the screw-A(T3x8) and remove the Door sw board-A.
1. Remove the screw-B(T3x8) and remove the Door sw board-B.
Fig. 4-3
R/C board
Tape
Door sw board-A
Door sw board-B