Sanyo PLV-Z4 - Main Board Removal

- 19 -
A
A
A
A
A
B
B
5
Main board removal.
1. Remove the 4 screws-A(M3x6), remove the Shield plate and remove the Main board.
6-1
Lamp exhaust duct ass'y removal.
1. Remove the screw-A(M3x6), remove 2 screws-B(T3x8) and remove the Lamp
exhaust duct ass'y.
Fig. 5
Fig. 6-1
Main board
Shield plate
Lamp exhaust duct ass'y
Mechanical disassemblies