Sanyo PLV-Z4 - Optical Unit Removal

- 26 -
11
Optical unit removal.
1.Remove the screw-A(M3x6), remove the 5 screws-B(T3x10), remove the Optical unit and remove
the Spacer sheet bottom.
A
B
B
B
B
B
Fig. 11
Optical unit
Spacer sheet bottom
12
Filter board removal.
1.Remove the 4 screws-A(T3x8), remove the screw-B(M3x6) and remove the Filter board.
A
A
A
A
B
Fig. 12
Filter board
Mechanical disassemblies