Sanyo PLV-Z4 - Page 29

- 29 -
17
Cabinet bottom ass'y disassemblies.
1.Remove the 2 screws-A(T3x8) and remove the Lamp sw board.
2.Remove the screw-B(M2x2) and remove the Thermistor ass'y(TH902).
3.Remove the 2 screws-C(T3x8) and remove the Adjusters(R & L).
A
A
B
C
C
Fig. 17
Lamp sw board
Thermistor ass'y
Adjustor
Adjustor
Mechanical disassemblies