Sanyo PLV-Z4 - Contrast Adjustment (Polarized Glass-G,B) Steps

- 51 -
Optical adjustment
4-1. Contrast adjustment (Polarized glass-G,B)
SCREW-A
SCREW-A
SLOT-B
SLOT-B
Fig. 1
G
B
[ Before Adjustment ]
- Input a 100% of black raster signal.
1. Loosen a screw
A on the polarized glass mounting base which you intend to adjust.
2. Adjust the slot B to obtain the darkest brightness on the screen as shown in Fig. 1.
3. Tighten the screw
A to fix the polarized glass mounting base.
Repeat steps 1 to 3 for remaining polarized glasses.