- 46 -
1. Contrast adjustment (Polarized glass and Optical filter)
[ Before Adjustment ]
- Input a 100% of black raster signal.
1. Loosen a screw A on the optical base which you intend to adjust.
2. Adjust the slot B to obtain the darkest brightness on the screen.
(Polarized glass adjustment.)
3. Adjust the slot
C to obtain the darkest brightness on the screen.
(Optical filter adjustment.)
4. Tighten the screw
A to fix the polarized glass mounting base.
Repeat steps 1 to 4 for remaining polarized glasses.
Blue Optical lter is not adjusted.
Screw-A
Screw-A
Slot-B
Optical lter
Polarized glass
Slot-C
Slot-B
Slot-B
Slot-C
Optical Adjustments
To Next Page
Loading...
