RECORDING TELEVISION BROADCASTS
Insert a videocassette.
Press the numeric buttons, or the CHANNEL (+ or -)
button, to select the channel to be recorded.
Example Position number “2”
Press the
● REC buttons.
Video recording starts. This is the normal video
recording procedure.
Mis-erasure prevention eject
The cassette will automatically be ejected if recording is
attempted on a video cassette without an erasureprevention
tab.
To stop the recording, press the
■ STOP button.
Auto rewind
The VCR automatically rewinds the tape when it reaches the
end. Thisfunctiondoes notoperate withtimer recordingor
QSR timer recording.
Timer recording is simple.
You can start a recordina and then mocvamme when the VCR
is to stop recording and ~o to stand%y-mode automatically.
~ Press the
● REC buttons to start recording.
@Press
the ● REC buttonsagain and the “OFF --:- -“
indication will start flashing on the VCR display.
mm
Within 10 seconds, set the recording end time by using the
● REC and CHANNEL (+ or -) buttons. The timer indicator
(IZi) will light after the recording end time is set.
❑ Each press of the. REC buttons will advance the
recording end time by units of 30 minutes.
❑ Each press of the CHANNEL (+) button will advance the
recording end time by units of 1 minute.
❑ Each press of the CHANNEL (-) button will retard the
recording end time by units of 1 minute.
m
❑ To stop the recording at any time, press the H STOP
button.
Checking/Changing
When the ● REC buttons are pressed during QSR recording,
the recording end time will blink for 10 seconds.
The recording end time can be changed by pressing the
● REC and CHANNEL (+ or -) buttonsduringthis 10-second
period.
[f you wish to avoid recording unwanted material
O
During recording, press the II PAUSEISTILL button.
The TV picture and sound will not be recorded.
o Press the II
PAUSE/STILL button or ● REC bu~ons, and
the recording will resume.
Note If the record pause mode continues for about five
minutes, the VCR will automatically go into the stop
mode in order to prevent damage to the tape.
Recording
one programme while watching another
OStart recording the desired TV programme selected on the
VCR.
@Select on the TV receiver the programme you want to
watch.
9
To Next Page
Loading...
