Turning the power on when the power save function is active
To save battery power, the power save function automatically turns off the
power after a period of no operation (about 1 minute in the shooting mode or
about 5 minutes in the playback mode).
To restore power when in the power save mode, perform one of
following steps.
œ Close and open the lens cover (only in the shooting
mode).
œ Press the shutter release button once.
œ Press the [MODE] button.
When in the playback mode, you can also...
œ Move the main switch to another position, then back
to [Ô].
NOTE
To protect your camera’s lens...
œ Although pictures can be viewed with the lens cover open, closing the
cover is recommended to protect the lens.
œ When using the AC adaptor (sold separately), the power save function will
become active after about 30 minutes of inactivity.
Shutter
release
button
English
22
To Next Page
Loading...
Need help?
General
