SHOOTING STILL IMAGES
Important points when capturing images
When the next picture cannot be taken...
œ When the standby indicator is flashing, the next picture cannot be
taken. When the indicator lights, the next picture can be taken.
When the shutter release beep sounds are desired...
œ You can change the setting so that the camera makes a beep sound
when the shutter release button is pressed (see page 65).
To save battery consumption...
œ You can also take pictures without using the LCD monitor (see page
40).
To view a captured image immediately...
œ After taking a picture, if you move the main switch to [Ô], you can
view the image that was just captured on the LCD monitor.
Where are pictures stored?
œ Pictures are stored on the memory card if installed and otherwise to
the camera’s internal memory.
Avoid photographing subjects that are positioned in front of
bright light sources.
œ Flare (lines or patterns of light) may appear in pictures where the
subject is lit from behind.
25
English
To Next Page
Loading...
