Sanyo VPC-R1 - Capturing Sequential Shots and Flash Use

SEQUENTIAL SHOTS
4
Capture the pictures.
1 Center the subject in the viewfinder, press the
shutter release button halfway and hold it there.
œ
Camera settings such as the exposure are
automatically set.
2 Press the shutter release button all the way.
œ
Shooting starts.
œ
When three pictures have been taken,
sequential shot shooting stops.
œ
Refer to page 25 for important points to
consider when capturing images.
CAUTION
œ In the sequential shooting modes, the flash cannot be used.
Shutter release
button
[SET] button
LCD monitor
Press halfway
Press all the way
27
English