Sanyo VPC-R1 - Date Display Options and Completion

SETTING THE DATE AND TIME
7
Set the date display.
1Press [l] to select [DISP].
2Press the [SET] button.
œ
The current indication changes to orange.
3Press [l].
œ
Each time [l] is pressed, the display
changes in the following order:
œ
Each time [j] is pressed, the display
changes in the reverse order.
œ
If “OFF” is selected, the date is not shown
during playback.
4After selecting the date display, press the
[SET] button.
œ
The display returns to the screen in step 1.
8
Select [EXIT], and press the [SET] button.
œ The date and time settings are completed, and the display returns to
the screen in step 3.
CLOCK SET
2002/08/28
19:30
ON Y/M/D
EXIT
CLOCK SET
j
ON Y/M/D
l
CLOCK SET
2002/08/28
19:30
ON Y/M/D
EXIT
63
English