Problem Cause & Solution P.
The camera
cannot be
operated.
A temporary internal circuitry problem may be the
cause.
—
⇒Remove the batteries from the camera, wait a
few minutes, then reinstall the batteries and try
again.
[SYSTEM
ERROR] is
displayed.
A problem has occurred within the camera or card.
⇒Try the following measures.
1Remove the card, and then install it again.
2Remove the batteries, and then install them
again.
3
Remove the batteries, wait about 1 hour, and
then install them again.
4Install a different card.
⇒If the [SYSTEM ERROR] message still
appears after the above measures are
performed, take the camera to a dealer for
service.
Other
English
76
To Next Page
Loading...
Need help?
General
