73 English
COPY DATA
5 Press the SET button.
h The screen to select the type of
copy appears.
h The copy source is shown in the
background on the screen.
COPY SINGLE:
Copy the data for one image.
COPY ALL:
Copy all the data from the copy
source to the copy destination.
6 Select the desired type of copy.
<When selecting COPY SINGLE>
1 Press the [l] or [m] button to display the image you wish to copy.
2 Press the [n] or [o] button to select “COPY SINGLE”.
<When selecting COPY ALL>
1 Press the [n] or [o] button to select “COPY ALL”.
7 Press the SET button.
h The files are copied.
INT MEM
To Next Page
Loading...
