English 46
Capture a still image with a voice memo
With the still-image-plus-audio a scene function, you can add an audio
track (about 10 seconds maximum) to a captured still image. This audio track
is called a “voice memo”.
1 On the screen to select the scene function settings (page 44), select
a, and press the SET button.
2 Press the shutter button to take the picture, then speak into the
microphone.
h During recording, be careful not to obstruct the microphone with your
fingers, for example.
h The maximum recording time for a voice memo is about 10 seconds.
h To end the recording before 10 seconds has elapsed, press the
shutter button.
To Next Page
Loading...
