Sanyo VPC S6 - Xacti Digital Camera - Page 90

English 84
1 [Date and time setting]
(page 19)
h Set the camera’s internal
clock.
2 [Sounds] (page 85)
h Adjust the sounds produced
by the camera.
3 [Post-view] (page 87)
h Specify how long a still image
is displayed on the monitor
after it is captured.
4
[LCD brightness] (page 29)
h Adjust the brightness of the
monitor.
5 [Screen language] (page 88)
h Select the language in which
the monitor messages are
displayed.
6 [TV system setting] (page 89)
h Select the type of TV signal
that is output from the
camera’s PC/AV terminal.
7 [Auto power off] (page 90)
h Specify the time elapsed
before the auto power off
function operates to turn the
camera off.
8 [File number reset] (page 92)
h Set the file number reset
function to ON or OFF.
9
[ Format ] (page 95)
h Reformat the camera’s internal
memory or the card installed in
the camera.
0 Reset camera settings
(page 97)
h Reset the camera to the
factory-preset settings.
i Icons 7 through 0 are displayed when you press the [n] or [o] button to
scroll.