Sanyo Xacti VPC-CA 9 - Connecting to a Printer; Printing; Print Preparations

English 140
CONNECTING TO A PRINTER
CONNECTING TO A PRINTER
CONNECTING TO A PRINTER
PRINTING
Your camera supports the PictBridge function. By connecting the camera
directly to a PictBridge-enabled printer, the camera’s monitor can be used to
select images and initiate printing (PictBridge printing).
Use the dedicated USB interface cable to connect the camera to a printer.
Print preparations
1 Turn the printer on, and use the supplied USB interface cable to
connect the camera to the printer.
h Connect the camera’s USB/AV terminal to the printer’s USB
connector.
2 Turn on the camera (page 30).
h The USB Connection Screen appears on the camera’s monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL OK
Supplied dedicated USB
interface cable
To USB connector
on the printer
To the USB/AV terminal on
the camera
SET button