NOTE
œ Under normal conditions, while the batteries are being replaced, an internal
battery will maintain the date and time settings. However, there is a small
chance the settings may be lost. (The backup will last for about 7 days.) It
is recommended to check that the date and time settings are still correct
after replacing the batteries and before shooting or recording of any type
(follow steps 1 and 2).
To correct the date and time settings
œ After steps 1 and 2, press the [l] arrow button to select the line of the
setting that you want to change, and press [c] to select that setting. Then
press [j] or [l] to set the new setting.
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
English
108
To Next Page
Loading...
