Sanyo Xacti VPC-S1 - Power Save Setting

POWER SAVE SETTING
3
Press the [j] or [l] arrow button to
select the desired option.
4
Press the SET button.
œ The Set Standby Time Screen
appears.
5
Press the [j] or [l] arrow button to
set the standby time.
[j]: Increases the standby time.
[l]: Decreases the standby time.
6
Press the SET button.
œ The standby time is set, and you are
returned to the Power Save Setting
Screen.
<Example: When “BATT/CAM”
is selected>
PS
POWER SAVE
BATT/CAM º 1min.
‡
§
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
115
English