POWER SAVE SETTING
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery power when the camera is not being used, or to
prevent the batteries from dying if the camera has accidentally been left on.
You can specify the elapsed time (standby time) before the power save
function is activated.
1
Display the Option Setting Mode
Screen (see page 103).
2
Select the power save icon é, and
press the SET button.
œ The Power Save Setting Screen
appears.
BATT/CAM:
Set the standby time for the shooting
modes when the batteries are used.
BATT/PB:
Set the standby time for the playback
modes when the batteries are used.
EXT.PWR/CAM.PB:
Set the standby time for the shooting
and playback modes when the AC
adapter is connected.
EXIT:
Return to the Option Setting Mode
Screen.
OPERATION BEEP
HELP DISP
LANGUAGE
TV SYSTEM
REFORMAT
POWER SAVE
PS
POWER SAVE
BATT/CAM
º
1min.
BATT/PB
º
5min.
EXT.PWR/CAM.PB
º
10min.
EXIT
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
English
114
To Next Page
Loading...
Need help?
General
