Sanyo Xacti VPC-S1 - Page 111

3
Press the [j] or [l] arrow button to select the desired option, and
then press the SET button.
<If MUTE is selected>
œ The screen to turn the operation sounds on or off appears.
œ Press the [j] or [l] arrow button to select the desired setting, and
press the SET button.
ON: The operation sounds are muted.
OFF: The operation sounds are not muted.
<If SHUTTER or KEY SW is selected>
œ The screen to enable or disable the operation sounds appears.
œ Press [j] or [l] arrow button to select the desired setting, and press
the SET button.
ON: The operation sounds are enabled.
OFF: The operation sounds are disabled.
4
Select “EXIT” and press the SET button.
œ You are returned to the Option Setting Mode Screen.
HINT
œ The volume of the operation sounds cannot be adjusted.
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
English
110