5
Press the SET button.
œ Reformatting begins.
œ During reformatting, “REFORMAT”
and “DO NOT POWER OFF” are
shown on the LCD monitor.
œ When reformatting is finished, you
are returned to the Option Setting
Mode Screen.
CAUTION
Caution during reformatting
œ Do not turn off the power to the camera or eject the card during
reformatting.
Reformatting erases the data
œ When a card is reformatted, all data recorded on the card is erased.
Protected data (see page 79) is also erased, so before reformatting a card,
any data you want to keep should be copied to your personal computer’s
hard disk or other storage medium.
HINT
To cancel reformatting
œ In step 4, select “NO”, and press the SET button. You are returned to the
Option Setting Mode Screen.
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
121
English
To Next Page
Loading...
