Sanyo Xacti VPC-S1 User Manual

Problem Cause Action
Reference
page
Shooting
An image is not
captured when
the shutter
release button is
pressed.
The memory is
full (the
accessing
indicator lights
red, the
displayed
number of
remaining
images that can
be captured
becomes [0] on
the LCD
monitor).
Install a new
card.
22
Erase the
images that are
not necessary.
Save the
images to
separate media,
then erase all
the images from
the card.
81, 126
The flash does
not operate.
The flash off
mode is
selected.
Set the flash to
automatic flash
mode or forced
flash mode.
59
The shooting
mode is set to a
mode other than
the still image
shooting mode.
Set the camera
to the still image
shooting mode.
35
The batteries
are dead.
Replace the
batteries.
21
A warning tone
(beep-beep-beep)
sounds, and it is
not possible to
take a picture
using the
self-timer.
The batteries
are consumed.
Install new
batteries.
21
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
English
142

Sanyo Xacti VPC-S1 Specifications

General

Brand	Sanyo
Model	Xacti VPC-S1
Category	Digital Camera
Language	English