ERASING DATA
6
Press [j] to select “YES”, and press
the SET button.
œ “ERASING” is displayed, after which
the next image appears. The data is
erased.
œ To erase other data, select “EXIT”,
and press [d] or [c] to display the
data that you want to erase and
repeat step 6.
HINT
To select a different data in step 5...
œ If ONE ERASE is selected, select “EXIT”, and press [d] or [c] on the
arrow button to select different data.
œ If “GROUP ERASE” is selected, all the images are erased, regardless of
the image that is currently displayed.
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
83
English
To Next Page
Loading...
Need help?
General
