14
Starting Up the BA 4100 S, BA 3100 P, BA 2100 S, BA 610,
BA 6100, BA 4100 and BA 2100
Place the weighing pan
(1)
on the balance
Connecting the Balance to AC Power
Your balance is energized by an AC adapter. Make sure the voltage
rating printed on this unit is identical to your local line voltage.
lf the voltage rating specified on the AC adapter or plug design does
not match the rating or Standard you use, please contact your Sarto-
rius dealer or Office.
Important Note
Only use original Sartorius AC adapters identified by the Sartorius la-
bel. Use of AC adapters from other manufacturers, even if these units
have a registered approval rating from a national testing laboratory,
requires the consent of a certified Sartorius technician.
For information about operating the balance with an external battery
pack, see the section entitled "Accessories."
Detailed information on additional options for powering the balance is
available in our Service Information Bulletin, no. 15/88 (for example,
using local extra-low voltage).
To Next Page
Loading...
