Sartorius BA 6100 - Changing Balance Settings; Accessing and Modifying Menu Settings

26
Changing Settings in the Balance
Operating Menu
Select the appropriate code to change settings for
certain functions.
There are three Steps to changing a code:
- access the menu
- set the code
- confirm and store this code
The following keys have special functions when setting a code:
CAL (13)
= in crease displayed digit (once you have run
through all numbers, the series will start again
from "0")
T (15)
= confirm settings, store them and exit the menu
(14)
= move to the right and left
Now please try it for yourself - turn off the beeper tone (acoustic Sig-
nal) - code:
8 2 2
.
How to Access the Menu
- Turn off the balance
- Hold down the tare key
(15)
and briefly press the ON/OFF key
(16)
- Release the tare key once " | " appears in the display
- When the display shows "
—
" in front of the left number, remove
the protective cap located on the front right of the balance and
move the menu access switch
(9)
in the direction of the arrow