24
Additional functions:
Beep Tone (Acoustic Signal)
If you desire, you can turn off the beep tone – also called an acoustic signal.
Acoustic signal Code Changes
ON 8 2 1 *
OFF 8 2 2
Universal Switch
An external switch can be connected via the interface port – you can change the setting in the menu code to
alter the function of this switch
Funktionen Code Changes
Print 8 4 1 *
Tare 8 4 2
Power-On Mode
Depending on the your operating requirements, you can change the power-on mode of your balance.
lf you define the code for "toggle between on and off," the balance power will remain turned off after a power
failure has occurred or after you have temporarily disconnected your balance from AC current. After the bal-
ance is turned off, power is not available for the "standby" mode. Use the ON/OFF key
(16)
to turn the bal-
ance on or off.
In the setting "toggle between on and standby", the balance power is turned on automatically after a power
failure has occurred or after you have disconnected your balance temporarily from AC power.
In the setting "automatic power-on," the balance will automatically turn on again after a power failure has
occurred, the balance has been disconnected from AC power, or after you have pressed the ON/OFF key
(16)
. In this setting, the balance can no longer be turned off by the ON/OFF key.
Power-on mode Code Changes
(Power) off Æ on ÅÆ standby 8 6 1 *
on ÅÆ (Power) off 8 6 2
on ÅÆ standby 8 6 3
Automatic power-on 8 6 4
Automatic Shutoff
(functions only if the menu code 8 6 2 is selected or if the balance is powered by the
rechargeable battery pack)
lf you operate the balance with a battery pack, set the menu code for the "Automatic Shutoff" function in or-
der to save energy and thereby increase the service life of the battery. lf the weight shown in the display
does not change for 2 minutes, the display will show "
". After another 2 minutes, the balance turns itself
off automatically.
Automatic Shutoff Code Changes
ON 8 7 1
OFF 8 7 2 *
* = factory setting, depends on balance model in some cases
To Next Page
Loading...