6
Connecting the Balance/Scale to AC Power/
Safety Precautions
Use only original Sartorius AC adapters:
– for Europe: 6971948 – for the RSA: 6971949
– for the U.S.: 6971947 – for Australia: 6971950
§ Insert the right-angle plug into the jack
§ The AC adapter rated to Class 2 can be plugged into
any wall outlet without requiring any
additional safety precautions
The ground is connected to the balance/scale
housing, which can be additionally grounded
for operation.
Using a Non-Rechargeable/Rechargeable Battery
(not for models BL210S, BL120S, BL60S, BL150S,
BL1500S, GC503, GC103, GM1502, GM2202,
GM1202)
$ A non-rechargeable or rechargeable battery is not
included with the equipment supplied
!Use only a commercially available non-rechargeable
or rechargeable 9-volt battery
!When using a rechargeable battery, always use an
external charger to recharge the battery
§ Lay the balance/scale on its side
§ Open the battery compartment:
Lift the compartment cover
§ Insert the 9-volt (rechargeable) battery in the
compartment
$ Make sure to connect the positive and negative
poles correctly
!All used batteries are classified as waste
that requires special handling (not “household”
waste). Dispose of rechargeable batteries in accor-
dance with the applicable special waste disposal reg-
ulations.
§ Close the battery compartment:
Press down on the cover until it clicks into place
To Next Page
Loading...