13
Example
Determine an unknown percentage; store the weight on the balance/ scale
as a reference percentage
Settings (changes in the factory settings required for this example):
Menu: Application program: Weighing in percent (menu code2. 1. 5)
Menu: Reference percentage 100 % (menu code3. 3. 5)
Step Key (or instruction)Display/ Printout
11. Turn on the balance/ scale e
12. Tare the balance/ scale t 0.0 g
13. Display the reference
percentage v > 2 sec. r ef 100
14. Place the reference weight +222.50 g
for 100% on the balance/ scale
(here: 222.5 g)
15. Start application; if the print v +100.00 %
format is set to include data
ID codes,
the following is printed: Wxx% + 222.500 g
16. Place an unknown weight +144.94 %
on the balance/ scale
(here: 322.5 g)
17. Display weight v + 322.5 g
18. Display percentage v +144.94 %
19. Unload the balance/ scale 0.00 %
10. Delete the reference percentage c
11. Repeat the procedure starting
from step 6, if desired.
To Next Page
Loading...
