21
Care and Maintenance
Service
Regular servicing by a Sartorius technician will
extend the service life of your balance/ scale and
ensure its continued weighing accuracy. Sartorius
can offer you service contracts, with your choice of
regular maintenance intervals ranging from1 month to
2 years. The frequency of the maintenance intervals
depends on the user's operating conditions and the
tolerance limits.
Repairs
Repair work must be performed by trained service
technicians. Any attempt by untrained persons
to perform repairs may lead to hazards for the user.
Cleaning
! Disconnect the balance/ scale from the AC
adapter and unplug any interface cables that are
connected to the balance/ scale
! Make sure that no liquid enters the
balance/ scale housing
! Do not use any aggressive cleaning agents
(solvents or similar agents)
Clean the balance/ scale using a piece of cloth
which has been wet with a mild detergent (soap)
After cleaning, wipe down the balance/ scale
with a soft, dry cloth
Removing and Cleaning the Weighing Pan:
Lift up and remove the weighing pan together
with the pan support by gripping them from under
the shield ring. Make sure that you do not
damage the weighing system in doing so.
To Next Page
Loading...
